Vantec Nexstar GX USB 3.0 Dual 2.5' SATA SSD/HDD RAID Enclosure, Black (NST-272S3-BK) By. There is another RAID common among 4 bay NAS enclosures, RAID-10 requiring a minimum of 4 disks. Data is striped across two disks as in RAID-0 for performance and mirrored as in RAID-1 with the second pair. The effective space is halved but you get peace of mind. Top 12 Best Budget 2-Bay and 4-Bay Network Attached Storage Enclosures. Look no further July 31, 2016 I've been using this 4 bay raid enclosure for about 6 weeks now. I bought the enclosure without drives as I already had four 2TB Hitachi hard drives. Installation was quick and easy. Being it was the RAID 5 Solution, it came with SoftRAID software which is very easy to use.
-->Applies to: Windows Server 2019, Windows Server 2016, Windows Server 2012 R2, Windows Server 2012
This topic describes how to deploy Storage Spaces on a stand-alone server. For information about how to create a clustered storage space, see Deploy a Storage Spaces cluster on Windows Server 2012 R2.
To create a storage space, you must first create one or more storage pools. A storage pool is a collection of physical disks. A storage pool enables storage aggregation, elastic capacity expansion, and delegated administration.
From a storage pool, you can create one or more virtual disks. These virtual disks are also referred to as storage spaces. A storage space appears to the Windows operating system as a regular disk from which you can create formatted volumes. When you create a virtual disk through the File and Storage Services user interface, you can configure the resiliency type (simple, mirror, or parity), the provisioning type (thin or fixed), and the size. Through Windows PowerShell, you can set additional parameters such as the number of columns, the interleave value, and which physical disks in the pool to use. For information about these additional parameters, see New-VirtualDisk and the Windows Server storage forum.
Note
You can't use a storage space to host the Windows operating system.
From a virtual disk, you can create one or more volumes. When you create a volume, you can configure the size, drive letter or folder, file system (NTFS file system or Resilient File System (ReFS)), allocation unit size, and an optional volume label.
The following figure illustrates the Storage Spaces workflow.
Figure 1: Storage Spaces workflow
Note
This topic includes sample Windows PowerShell cmdlets that you can use to automate some of the procedures described. For more information, see PowerShell.
Prerequisites
To use Storage Spaces on a stand-alone Windows Server 2012−based server, make sure that the physical disks that you want to use meet the following prerequisites.
Important
If you want to learn how to deploy Storage Spaces on a failover cluster, see Deploy a Storage Spaces cluster on Windows Server 2012 R2. A failover cluster deployment has different prerequisites, such as supported disk bus types, supported resiliency types, and the required minimum number of disks. Install os x 10 12 on unsupported mac.
| Area | Requirement | Notes |
|---|---|---|
| Disk bus types | - Serial Attached SCSI (SAS) - Serial Advanced Technology Attachment (SATA) - iSCSI and Fibre Channel Controllers. | You can also use USB drives. However, it's not optimal to use USB drives in a server environment. Storage Spaces is supported on iSCSI and Fibre Channel (FC) controllers as long as the virtual disks created on top of them are non-resilient (Simple with any number of columns). |
| Disk configuration | - Physical disks must be at least 4 GB - Disks must be blank and not formatted. Do not create volumes. | |
| HBA considerations | - Simple host bus adapters (HBAs) that do not support RAID functionality are recommended - If RAID-capable, HBAs must be in non-RAID mode with all RAID functionality disabled - Adapters must not abstract the physical disks, cache data, or obscure any attached devices. This includes enclosure services that are provided by attached just-a-bunch-of-disks (JBOD) devices. | Storage Spaces is compatible only with HBAs where you can completely disable all RAID functionality. |
| JBOD enclosures | - JBOD enclosures are optional - Recommended to use Storage Spaces certified enclosures listed on the Windows Server Catalog - If you're using a JBOD enclosure, verify with your storage vendor that the enclosure supports Storage Spaces to ensure full functionality - To determine whether the JBOD enclosure supports enclosure and slot identification, run the following Windows PowerShell cmdlet: Get-PhysicalDisk | ? {$_.BusType –eq 'SAS'} | fc | If the EnclosureNumber and SlotNumber fields contain values, then the enclosure supports these features. |
To plan for the number of physical disks and the desired resiliency type for a stand-alone server deployment, use the following guidelines.
| Resiliency type | Disk requirements | When to use |
|---|---|---|
| Simple - Stripes data across physical disks - Maximizes disk capacity and increases throughput - No resiliency (does not protect from disk failure) | Requires at least one physical disk. | Do not use to host irreplaceable data. Simple spaces do not protect against disk failure. Use to host temporary or easily recreated data at a reduced cost. Suited for high-performance workloads where resiliency is not required or is already provided by the application. |
| Mirror - Stores two or three copies of the data across the set of physical disks - Increases reliability, but reduces capacity. Duplication occurs with every write. A mirror space also stripes the data across multiple physical drives. - Greater data throughput and lower access latency than parity - Uses dirty region tracking (DRT) to track modifications to the disks in the pool. When the system resumes from an unplanned shutdown and the spaces are brought back online, DRT makes disks in the pool consistent with each other. | Requires at least two physical disks to protect from single disk failure. Requires at least five physical disks to protect from two simultaneous disk failures. | Use for most deployments. For example, mirror spaces are suited for a general-purpose file share or a virtual hard disk (VHD) library. |
| Parity - Stripes data and parity information across physical disks - Increases reliability when it is compared to a simple space, but somewhat reduces capacity - Increases resiliency through journaling. This helps prevent data corruption if an unplanned shutdown occurs. | Requires at least three physical disks to protect from single disk failure. | Use for workloads that are highly sequential, such as archive or backup. |
Step 1: Create a storage pool
You must first group available physical disks into one or more storage pools.
In the Server Manager navigation pane, select File and Storage Services.
Acrobat reader for windows 8 1 free download. In the navigation pane, select the Storage Pools page.
By default, available disks are included in a pool that is named the primordial pool. If no primordial pool is listed under STORAGE POOLS, this indicates that the storage does not meet the requirements for Storage Spaces. Make sure that the disks meet the requirements that are outlined in the Prerequisites section.
Tip
If you select the Primordial storage pool, the available physical disks are listed under PHYSICAL DISKS.
Under STORAGE POOLS, select the TASKS list, and then select New Storage Pool. The New Storage Pool Wizard will open.
On the Before you begin page, select Next.
On the Specify a storage pool name and subsystem page, enter a name and optional description for the storage pool, select the group of available physical disks that you want to use, and then select Next.
On the Select physical disks for the storage pool page, do the following, and then select Next:
Select the check box next to each physical disk that you want to include in the storage pool.
If you want to designate one or more disks as hot spares, under Allocation, select the drop-down arrow, then select Hot Spare.
On the Confirm selections page, verify that the settings are correct, and then select Create.
On the View results page, verify that all tasks completed, and then select Close.
Note
Optionally, to continue directly to the next step, you can select the Create a virtual disk when this wizard closes check box.
Under STORAGE POOLS, verify that the new storage pool is listed.
Windows PowerShell equivalent commands for creating storage pools
The following Windows PowerShell cmdlet or cmdlets perform the same function as the preceding procedure. Enter each cmdlet on a single line, even though they may appear word-wrapped across several lines here because of formatting constraints.
Apple mac disk cleanup. The following example shows which physical disks are available in the primordial pool.
The following example creates a new storage pool named StoragePool1 that uses all available disks.
The following example creates a new storage pool, StoragePool1, that uses four of the available disks.
The following example sequence of cmdlets shows how to add an available physical disk PhysicalDisk5 as a hot spare to the storage pool StoragePool1.
Step 2: Create a virtual disk
Next, you must create one or more virtual disks from the storage pool. When you create a virtual disk, you can select how the data is laid out across the physical disks. This affects both reliability and performance. You can also select whether to create thin- or fixed-provisioned disks.
If the New Virtual Disk Wizard is not already open, on the Storage Pools page in Server Manager, under STORAGE POOLS, make sure that the desired storage pool is selected. Starcraft 1 campaign download.
Under VIRTUAL DISKS, select the TASKS list, and then select New Virtual Disk. The New Virtual Disk Wizard will open.
On the Before you begin page, select Next.
On the Select the storage pool page, select the desired storage pool, and then select Next.
On the Specify the virtual disk name page, enter a name and optional description, then select Next.
On the Select the storage layout page, select the desired layout, then select Next.
Note
If you select a layout where you do not have enough physical disks, you will receive an error message when you select Next. For information about which layout to use and the disk requirements, see Prerequisites).
If you selected Mirror as the storage layout, and you have five or more disks in the pool, the Configure the resiliency settings page will appear. Select one of the following options:
- Two-way mirror
- Three-way mirror
On the Specify the provisioning type page, select one of the following options, then select Next.
Thin
With thin provisioning, space is allocated on an as-needed basis. This optimizes the usage of available storage. However, because this enables you to over-allocate storage, you must carefully monitor how much disk space is available.
Fixed
With fixed provisioning, the storage capacity is allocated immediately, at the time a virtual disk is created. Therefore, fixed provisioning uses space from the storage pool that is equal to the virtual disk size.
Tip Sound recorder full version.
With Storage Spaces, you can create both thin- and fixed-provisioned virtual disks in the same storage pool. For example, you could use a thin-provisioned virtual disk to host a database and a fixed-provisioned virtual disk to host the associated log files.
On the Specify the size of the virtual disk page, do the following:
If you selected thin provisioning in the previous step, in the Virtual disk size box, enter a virtual disk size, select the units (MB, GB, or TB), then select Next.
If you selected fixed provisioning in the previous step, select one of the following:
Specify size
To specify a size, enter a value in the Virtual disk size box, then select the units (MB, GB, or TB).
If you use a storage layout other than simple, the virtual disk uses more free space than the size that you specify. To avoid a potential error where the size of the volume exceeds the storage pool free space, you can select the Create the largest virtual disk possible, up to the specified size check box.
Maximum size
Select this option to create a virtual disk that uses the maximum capacity of the storage pool.
On the Confirm selections page, verify that the settings are correct, and then select Create.
On the View results page, verify that all tasks completed, and then select Close.
Tip
By default, the Create a volume when this wizard closes check box is selected. This takes you directly to the next step.
Windows PowerShell equivalent commands for creating virtual disks
The following Windows PowerShell cmdlet or cmdlets perform the same function as the preceding procedure. Enter each cmdlet on a single line, even though they may appear word-wrapped across several lines here because of formatting constraints.
The following example creates a 50 GB virtual disk named VirtualDisk1 on a storage pool named StoragePool1.
The following example creates a mirrored virtual disk named VirtualDisk1 on a storage pool named StoragePool1. The disk uses the storage pool's maximum storage capacity.
The following example creates a 50 GB virtual disk named VirtualDisk1 on a storage pool that is named StoragePool1. The disk uses the thin provisioning type.
The following example creates a virtual disk named VirtualDisk1 on a storage pool named StoragePool1. The virtual disk uses three-way mirroring and is a fixed size of 20 GB.
Note
You must have at least five physical disks in the storage pool for this cmdlet to work. (This does not include any disks that are allocated as hot spares.)
Step 3: Create a volume
Next, you must create a volume from the virtual disk. You can assign an optional drive letter or folder, then format the volume with a file system.
If the New Volume Wizard is not already open, on the Storage Pools page in Server Manager, under VIRTUAL DISKS, right-click the desired virtual disk, and then select New Volume.
The New Volume Wizard opens.
On the Before you begin page, select Next.
On the Select the server and disk page, do the following, and then select Next.
In the Server area, select the server on which you want to provision the volume.
In the Disk area, select the virtual disk on which you want to create the volume.
On the Specify the size of the volume page, enter a volume size, specify the units (MB, GB, or TB), and then select Next.
On the Assign to a drive letter or folder page, configure the desired option, and then select Next.
On the Select file system settings page, do the following, and then select Next.
In the File system list, select either NTFS or ReFS.
In the Allocation unit size list, either leave the setting at Default or set the allocation unit size.
Note
For more information about allocation unit size, see Default cluster size for NTFS, FAT, and exFAT.
Optionally, in the Volume label box, enter a volume label name, for example HR Data.
Downie 3 9 103. On the Confirm selections page, verify that the settings are correct, and then select Create.
On the View results page, verify that all tasks completed, and then select Close.
To verify that the volume was created, in Server Manager, select the Volumes page. The volume is listed under the server where it was created. You can also verify that the volume is in Windows Explorer.
Next, you must create a volume from the virtual disk. You can assign an optional drive letter or folder, then format the volume with a file system.
If the New Volume Wizard is not already open, on the Storage Pools page in Server Manager, under VIRTUAL DISKS, right-click the desired virtual disk, and then select New Volume.
The New Volume Wizard opens.
On the Before you begin page, select Next.
On the Select the server and disk page, do the following, and then select Next.
In the Server area, select the server on which you want to provision the volume.
In the Disk area, select the virtual disk on which you want to create the volume.
On the Specify the size of the volume page, enter a volume size, specify the units (MB, GB, or TB), and then select Next.
On the Assign to a drive letter or folder page, configure the desired option, and then select Next.
On the Select file system settings page, do the following, and then select Next.
In the File system list, select either NTFS or ReFS.
In the Allocation unit size list, either leave the setting at Default or set the allocation unit size.
Note
For more information about allocation unit size, see Default cluster size for NTFS, FAT, and exFAT.
Optionally, in the Volume label box, enter a volume label name, for example HR Data.
Downie 3 9 103. On the Confirm selections page, verify that the settings are correct, and then select Create.
On the View results page, verify that all tasks completed, and then select Close.
To verify that the volume was created, in Server Manager, select the Volumes page. The volume is listed under the server where it was created. You can also verify that the volume is in Windows Explorer.
Windows PowerShell equivalent commands for creating volumes
Best Raid Enclosure 2018
The following Windows PowerShell cmdlet performs the same function as the previous procedure. Enter the command on a single line.
The following example initializes the disks for virtual disk VirtualDisk1, creates a partition with an assigned drive letter, and then formats the volume with the default NTFS file system.
Best Raid Enclosure 2016
Additional information
